Elemental analysis of cemented carbides by calibration-free portable laser-induced breakdown spectroscopy

The process of cemented carbides manufacturing requires rapid and field elemental analytical techniques to control and evaluate the properties of products. Calibration-free laser-induced breakdown spectroscopy (CF-LIBS) is such a potential elemental analytical technique. In this work, a portable LIBS instrument combined with a CF method was developed for the analysis of cemented carbides. Three batches of cemented compact carbides without reference samples were analyzed. Qualitative and quantitative analysis of the samples were achieved by using the portable LIBS instrument combined with CF method. To validate the analysis results, X-ray fluorescence spectrometry (XRF) was used to analyze the samples as well. The results of CF-LIBS agreed well with the results of XRF, with relative errors between ?29.53 and 24.70%. The results demonstrated that the portable LIBS instrument combined with CF method was capable for direct and rapid analysis without any need of standard measurements. Notably, with the portable LIBS instrument combined with CF method, acceptable accuracy could be obtained, which is promising for practical field applications.     

Determination of olaquindox,carbadox and cyadox in animal feeds by ultra-performance liquid chromatography tandem mass spectrometry

Olaquindox, carbadox, and cyadox are chemically synthesised antibacterial and growth-promoting agents for animals. At high doses they may exert mutagenicity and hepatic and adrenal toxicities in animals. Regrettably, these substances are frequently abused or misused when added into animal feeds. Thus, developing a sensitive and reliable method for simultaneous determination of olaquindox, carbadox, and cyadox in different kinds of animal feeds is crucially important for food safety monitoring. In this paper we optimised instrumental conditions, extraction solvents, solid phase extraction cartridges, and pH of the loading solvents on the Oasis HLB cartridge. Under the optimal conditions, mean recoveries ranged from 74.1 to 111%, and intra-day and inter-day variations were lower than 14.6% and 10.8%, respectively. The limits of quantification for olaquindox, carbadox, and cyadox were 0.05 mg kg^?1, 0.10 mg kg^?1, and 0.025 mg kg^?1, respectively. The proposed method uses ultra-performance liquid chromatography tandem mass spectrometry and is sensitive and reliable for the simultaneous determination of olaquindox, carbadox, and cyadox in three kinds of animal feeds (specifically, mixed feed, concentrated feed, and additive premixed feed). This method has good precision, high sensitivity, and good reproducibility, and thus it can be used for convenient and accurate determination of olaquindox, carbadox, and cyadox in different kinds of animal feeds.     

沁水盆地赵庄矿3号煤层地面煤层气抽采低产原因分析

在对沁水盆地赵庄矿煤层气开发地质、煤层气生产井资料深入研究的基础上，分析、总结了区内煤层气直井低产原因，并据此提出了区内地面抽采后续开发方向。研究认为:3号煤层气含量偏低、含气饱和度低、临储比低，致使排采阶段气含量可降幅度低，是其低产的宏观表征；3号煤储层不匹配孔级，较差连通性，即微、小孔为主，中孔次之，大孔不发育，微裂隙连通性差，致使扩散缓慢、影响储层改造和抽采效果，是其低产的微观表征；3号煤层远高于顶底板塑性及相近的水平应力，进一步造成改造缝长受限，泄流面积不足。因此，建议区内后续地面抽采方式应以增大泄流面积开发方式为主。     

Tribological behavior studies of chemically bonded phosphate ceramic coatings reinforced with modified multi-walled carbon nanotubes (MWCNTs)

To improve the wear resistance of the chemically bonded phosphate ceramic coatings, MWCNTs are selected as the reinforcement after the modification. The high temperature wear experiment is carried out to investigate the wear behavior of the coatings with different temperatures. The results suggest that, when the temperature is below 500℃, MWCNTs can decrease friction coefficient, and the lowest friction coefficient is about 0.28, but MWCNTs lose the lubricant function at 500℃ and the friction coefficient keeps at the level of ~ 0.68. In addition, the wear resistance of coatings is improved with the introduction of MWCNTs at 100℃ and 300℃ (the wear rate is below 15X10^-3mm³/Nm), but keeps similar level at 500℃ (the wear rate is ~ 22 × 10⁻³mm³/Nm). Besides, the wear mechanism of the coatings reinforced by MWCNTs is also investigated based on the wear behavior and microstructural characterizations. MWCNTs improve the fracture toughness by preventing the crack generation and forming the bridge when crack occurs, which leads to smooth wear tracks and good wear resistance of coatings. The coatings with MWCNTs achieve poor wear resistance at 500℃ because MWCNTs lose their strength and resistance to fatigue by oxidizing.     

Chloroform Hydrodechlorination on Palladium Surfaces: A Comparative DFT Study on Pd(111), Pd(100), and Pd(211)

Topics in Catalysis - Palladium has been shown to be an effective catalyst for chloroform hydrodechlorination, which serves as a promising treatment method for industrial chloroform waste. To...     

15209综采工作面端面破碎机理及控制

15209工作面回采期间端面处出现破碎、冒落现象,造成液压支架初撑力、工作阻力降低,威胁着工作面安全高效回采。通过技术研究,分析了15209工作面端面破碎机理,提出了"施工梯形锚索吊棚+注浆加固+走向掏槽搭梁"联合控制措施。实际应用表明端面破碎、煤壁片帮现象得到控制,工作面回采速度提高至7.5m/d,取得了显著应用成效。     

Effect of laver powder on textual,rheological properties and water distribution of squid (Dosidicus gigas) surimi gel

In order to ameliorate the gel quality of Dosidicus gigas surimi, the effects of laver powder on gel properties, rheological properties, and water-holding capacity (WHC) were investigated. Results indicated that the addition of laver powder could significantly increase the hardness, chewiness, and breaking force of surimi gels. However, the texture indexes and gel strength began to decline when additional amount exceeded 0.6%. Rheological results demonstrated that the addition of laver powder increased the storage modulus (G′) and viscosity of surimi, prolonged protein denaturation temperature in surimi gels. Moreover, the WHC of surimi gel was improved with the increase of laver powder. Further analyses in low-field nuclear magnetic resonance revealed that laver powder could shorten the transverse relaxation time, enhanced the combination with water, and altered the distribution of different water categories. The proportion of bound water and immobilized water reached its maximum and minimum at 0.6% of laver powder, respectively. Correlation analyses showed that WHC of surimi gel was negatively correlated well with the proportion of loose-bound water, but positively correlated with the strong-bound water and free water. In conclusion, the results supported that 0.6% was the optimal additional amount of laver powder for the squid-based surimi production based on the current ingredients of surimi products.     

Advanced Functional Materials Constructed from Pillar[n]arenes

Pillar[n]arenes are new generation of supramolecular macrocyclic host, which exhibit excellent host−guest recognition properties. In the last decade, functional materials constructed from pillar[n]arenes have been attracted more and more attention and displayed outstanding characteristics, such as stimuli-responsiveness, self-healing and adaptability. In this mini-review, we provide a survey of the pillar[n]arene-based literatures covering light-harvesting systems, functional hydrogels, and solid materials. It is anticipated that more and more pillar[n]arenes-based advanced materials with multi-functional properties will appear in the near future.     

基于LP与小波包的复杂机电系统监测序列混沌降噪方法

针对流程工业生产系统监测数据存在强噪声和混沌性的特点,提出了一种局部投影方法(Local Projection Method)与小波包方法相结合的信号降噪方法。该方法先利用局部投影方法从动力学系统嵌入流形的角度进行多次迭代降噪,并根据关联维数来判定迭代终止;再利用小波包方法从频率的角度进行降噪,抑制高频噪声的干扰,取得了较好的降噪效果。用Lorenz时间序列进行仿真验证,对仿真时间序列加入不同程度的噪声,对比分析小波包、局部投影与该方法降噪后的相空间、SNR值和最大Lyapunov指数,证明了该方法对于中高强度噪声具有更好的降噪效果。并将该方法用于某压缩机组的实际监测数据降噪,评估三种方法的降噪效果,进一步验证了该方法的优越性。